10 Symptoms of Worn Wheel Hub Bearings

Symtoms Of A Worn Hub Bearing

The symptoms of worn wheel hub bearings can range, each in a severity of their own. Some signs can be hard to detect, which can cause damage before you’re able to take action. Usually, the amount of time before damage happens is connected to the driving conditions and/or any mechanical practices that occurred during the installation. One classic symptom is noise, if you hear a noise it could mean a bad wheel hub bearing or wheel bearing. Below are more ways to detect if a worn wheel hub bearing or a different wheel-end damage has occurred:

10 Symptoms Of A Worn Hub Bearing:

#1 – Clicking, snapping or popping

This may suggest a damaged or worn outer CV-joint. Although, it could also mean there is excessive bearing endplay, often the result of poor clamping. It is common to hear this noise when making sharp turns or cornering.

#2 – Grinding while in motion

Usually, this will mean mechanical damage already exists within the wheel-end system. In regards to bearings, it could mean you have a lack of integrity, like raceway or roller damages. This noise is commonly heard while shifting or turning.

#3 – Clunking or knocking

If you hear this type of noise, it could mean there is excessive amounts of play in the U-joints or CV-joints. It can even be the cause of excessive backlash with differential gears. Usually, this is not linked to bearings and commonly heard when shifting and changing directions from reverse or drive, or rom accelerating to a coast.

#4 – Rumbling, humming or growling

Usually these type of noises are connected with electrical, tire or drivetrain components. If it is related to the bearings, you often hear the vibration or noise while driving straight, and increases when turning the wheel just slightly to either direction. Generally, the opposite side of the noise is the side that is defective.

#5 – Wobble and/or wheel vibrations

While these symptoms can often be connected with worn tires, suspension or wheel components, it could be a severe chassis misalignment too. In relation to the bearing or wheel hub, it often suggests the lack of clamp or bearing with mechanical damage that is severe. It could also happen if lug nuts are not tightened properly. Although, some wheel vibrations can actually be caused by a bent car frame. That would qualify as an auto body repair, which usually costs around $300.

#6 – Shimmy, shudder, or a vibration at constant speeds

These symptoms are often connected with damaged or worn suspension components, but could be tires that are out-of-round or no longer balanced. It’s not usually indicative of bearing or hub damage.

#7 – Abnormal side pulling when applying brakes

This symptom is often the sign of a defective equalizer or caliper, but could also be signs of worn rotors or brakes. Although, a severe looseness in regards to bearings could lead to an excessive amount of runout, which could lead to brakes pulling or pulsating. The most common reason is warped rotors caused by the caliper not properly retracting.

#8 – Uneven brake pad or rotor wear

This is often a sign of a bad equalizer and/or caliper, but isn’t related to the bearing. Excessive runout can be caused by damaged or worn bearings causing severe looseness, which could lead to an uneven amount of wear on the rotor and/or brake pads. Commonly, this is due to a warped rotor from the caliper not properly retracting.

#9 – Uneven or abnormal tire wear

Many things can lead to abnormal tire wear, with the most common being damaged or worn suspension components, improper inflation, misalignment or tire selection. Meanwhile, excessive looseness or bearing wear could lead to abnormal tire wear, it is often caused by other modes of failure.

#10 – ABS failure, which can be either external or internal of the hub or bearing assembly

With extreme situations, the external and internal sensors are able to become damaged due to excessive movement related to excessive end-play. Therefore, suggesting the loss or lack of bearing clamp. Normally, this is the result of extreme mechanical damage or break up. Also, with designs that have sensors mounted on the external component, sensor damage could be the result of stones, corrosion, or various other hazards.

If you are experiencing any of the about issue, its very likely you have a worn hub bearing. Luckily, this is something that is totally repairable. If you need a word hub bearing repaired on your vehicle in Chandler, AZ, stop by ADS for a quick automotive diagnosis.

0 comments

Write a Comment

Fields with * are requierd